Category / Technology & Design

Epidural simulator wins Institution of Engineering and Technology Innovation Award

BU research, Research news

A medical device developed by Bournemouth University (BU) and Poole Hospital to make epidural injections safer and more effective has received a prestigious innovation award.
 
The epidural simulator uses software to predict where a patient’s epidural space will be, and helps doctors electronically measure the loss of pressure that occurs when they reach the space, to prevent errors.
 
The project won the Information Technology category at the Institution of Engineering and Technology (IET) Innovation Awards, which received more than 400 entries from over 30 countries.
Dr Venky Dubey, PhD student Neil Vaughan, and awards host and former Apprentice winner Tim Campbell.

L-R: Dr Venky Dubey, PhD student Neil Vaughan, and awards host and former Apprentice winner Tim Campbell.

“We knew that our project is unique as it blends engineering expertise and knowledge of clinicians directly dealing with the problems in their day to day care,” said Dr Venky Dubey, Associate Professor in Research at BU, who is leading the epidural simulator project alongside PhD student Neil Vaughan and Dr Michael Wee and Dr Richard Isaacs from Poole Hospital.
 
“We have done this several times in the past, competing with international institutions of repute like MIT and Harvard, but what is unbelievable this time is that we have won it against giant companies vying for this coveted award.
 
“Honestly, we are shocked to have won this award. It’s like winning a Technological Oscar for our hard work”.  
 
He added: “This clearly shows that there is a technology gap in patient care for epidurals and the associated safety issues. This award recognises our innovative approach that has the potential to reduce patient injury and improve training experience of anaesthetists.”
 
The IET Innovation Awards celebrate the best innovations in science, technology and engineering. The ceremony took place at The Brewery, in London last week.
 
The judging panel for the Information Technology category, in which the epidural simulator was named winner, said: “The standard for the IT Category is always high and this year was no exception. The 2013 winning entry provides an innovative training solution to teach the epidural procedure to medical practitioners.”

Corrosion Experimental Techniques to Simulate Operating Conditions

BU research

Bournemouth University’s Sustainable Design Research Centre has recently added stat-of-the-art Temperate-Humidity Environmental Chamber (THEC) to its resources, which has the ability to configure the resistance capabilities of various materials and coatings against environmental influences of temperature combined with humidity.

THEC provides facility to conduct corrosion simulation to investigate the durability of coatings and metal alloys subject to extreme operating conditions, in addition the susceptibility of components to corrosion that will eventually lead to malfunction. These simulated corrosion experiments monitor effectiveness of various materials under varying environmental conditions at an early stage to avoid catastrophic failures. These results inform prediction techniques to deploy to assess failure mechanisms and useful life of various structures, components and systems.

THEC has a temperature range of -40°C (aerospace applications) to +180°C (process industries applications) and from 0 (dry) to 100 (wet) Relative Humidity (%age). The test chamber can accommodate test samples of 350(W) x 300(D) x 310(H) mm. The chamber has vast applications when it comes to analyse the durability of coatings and strength of materials not only for daily life domestic products but also in aerospace and automotive industries. The chamber can also be used to analyse the safe working conditions for various electronic components and in Renewable Technology applications.

Environmental simulation is analysed through a PC interface using specialist analytical tool which enables to further optimise the utilisation of environmental testing systems, e.g. deployed in various research & development programmes, production and quality assurance. The operation of both the chamber and analytical tool provides opportunities of time and cost savings for the industry. Evaluation and documentation of various test cycles helps to evaluate the performance of vast variety of industrial products and other applications.

SDRC capabilities in experimental and modelling techniques to predict useful life of components, structures & systems subject to corrosion has the potential to inform design for durability and reliability.

If you would like further or specific information in this subject please contact

 

Dr Zulfiqar Khan (Associate Professor)

Director SDRC

Email: zkhan@bournemouth.ac.uk

 

 

 

Research website training sessions

BU research, Research news, Training

On Monday many of you will have seen Rebecca Edwards’ blog post giving more information about the new research website. It explains why BU is developing it, when the site will be live, how it will work and addresses some frequently asked questions that have cropped up in discussions.

If you missed this post you can view it here.

The new website will have a host of additional features, making it easier for you to update and add your own content. It provides a considerably improved platform for integrating a wider variety of content, such as image galleries and videos.

Research website screengrabTraining sessions are taking place over the next two months. You can book a session online or contact Rebecca Edwards for more information.

Using the website is surprisingly easy and in the sessions you’ll learn how to upload, edit and tag content. Rather than carrying out training sessions with ‘dummy’ test material, we would like to use the time for you to upload relevant content to your research theme.

We’d be grateful if you could please have something available that you can upload during the training session. Examples could include:

–          New or recent images

–          Videos

–          Details of a new research project

–          Details of successful grant applications

–          A profile of a post graduate researcher

–          Information about planned or recent public engagement activity

Rebecca Edwards or I will be happy to answer any questions in the meantime, so do get in touch. We look forward to seeing you at one of the training sessions.

Can We Sell Security Like Soap? A New Approach to Behaviour Change

BU research

Our next Interdisciplinary Cyber Security Seminar will take place on Tuesday, 19th November at 5pm. Our seminars are approachable, and require nothing more than a general interest in security, and an enquiring mind.

Our speaker will be Debi Ashenden, who is a Reader in Cyber Security and Head of the Centre for Cyber Security and Information Assurance at Cranfield University, based at the Defence Academy of the UK, Shrivenham. Prior to taking up her post at Cranfield University she was Managing Consultant within QinetiQ’s Trusted Information Management Dept (formerly DERA). She has been working in cyber security since 1998 and specialises in the social and behavioural aspects of cyber security. Her research is built on a socio-technical vision of cyber security that sees people as solutions rather than as the problem. Debi is the co-author of, ‘Risk Management for Computer Security: Protecting Your Network and Information Assets’, Butterworth Heinneman (2004).

Talk Abstract: Many organisations run security awareness programmes with the aim of improving end user behaviours around information security. Yet behavioural research tells us that raising awareness will not necessarily lead to behaviour change. This talk examines the challenge of changing end user behaviour and puts forward social marketing as a new paradigm. Social marketing is a proven framework for achieving behavioural change and has traditionally been used in health care interventions, although there is an increasing recognition that it could be successfully applied to a broader range of behaviour change issues. It has yet to be applied however, to information security in an organisational context. This talk will explore the social marketing framework in relation to information security behavioural change and highlight the key challenges that this approach poses for information security managers. We conclude with suggestions for future research.

The seminar will take place in EB202 in the Executive Business Centre, and will be free and open to all. If you would like to attend, we encourage you to register at http://www.eventbrite.co.uk/e/interdisciplinary-seminar-in-cyber-security-tickets-9336229915

Sustainable Design Research Centre – Research Seminar

BU research, PG research

Wednesday   20-11-2013

Room:   P302 LT (Poole House, Talbot Campus)

Start: 12:00 Finish: 13:00

APPLICATIONS OF CORROSION MODELLING IN THE PETROLEUM, DEFENCE AND AEROSPACE INDUSTRIES

There have been major developments in computer modelling of galvanic corrosion processes over the last twenty years which have resulted in modelling being widely used to simulate the performance of cathodic protection systems which are used to protect structures from corrosion both offshore and onshore. These physics based models represent the electrode kinetics on the metallic surfaces as well as the current flow through the electrolyte. In recent years similar technology has been developed to simulate galvanic corrosion between dissimilar metals in structures which are exposed to thin electrolyte films. For example aircraft and automobiles subject to humid atmospheres and splashing of de-icing fluids.

The work will present applications of the modelling technology in the Oil & Gas industry and describe recent developments in modelling aircraft structures.

The above work will be presented by Professor Carlos A. Brebbia and Dr Robert A Adey, external speakers from the Wessex Institute of Technology.

Professor Carlos Brebbia is Director of the Wessex Institute. After obtaining his PhD at Southampton, he worked at a major UK Research Laboratory before taking an academic appointment at Southampton University where he rose from Lecturer to Senior Lecturer and Reader.  During his time at Southampton he took leave to become Visiting Professor at many other universities, including Princeton. After having been appointed full Professor of Engineering at the University of California, Irvine, he decided to return to the UK to set up the Wessex Institute in the New Forest.

Professor Brebbia is renowned throughout the world as the originator of the Boundary Element Method, a technique that continues to generate important research work at the Wessex Institute.  He has written numerous scientific papers and is author or co-author of 14 technical books and editor or co-editor of more than 400 volumes. He is also Editor of several journals.

Carlos’ interests span from the analysis of advanced structures such as shells to the modelling of environmental problems, dealing with a wide variety of methodologies.  His most recent efforts have been concentrated on the development of Wessex Institute as an international centre of excellence.

Dr Robert A Adey (Bob) is Director Strategic Development at C M BEASY Ltd.  He has a PhD and MSc from Southampton University. UK.  He has over twenty years’ experience in the development and application of computer modelling software for corrosion and CP applications in the Oil & Gas, Defence and Aerospace industry. He is currently manages BEASY Collaborative R&D projects and major engineering services projects.

INTRODUCTION TO THE WESSEX INSTITUTE

Brief description of the objectives of Wessex Institute as a knowledge transfer organisation. This includes work in the field of computational modelling with a wide variety of applications, training and scientific meetings organisation, and the publication of scientific and technical literature.

 Wessex Institute collaborates with many institutions around the world and acts as a focus for the dissemination of the latest advances in a variety of fields.

If you have any questions or would like to know more about this seminar or any general inquires about research, enterprise or professional practice activities within Sustainable Design Research Centre please contact:

Dr Zulfiqar Khan (Associate Professor)

Director SDRC

e-mail: zkhan@bournemouth.ac.uk

A Review of Gaming Technologies for Stroke Patients

BU research, PG research, Research news

Our next Creative Technology Research Centre Research Seminar will be presented by Owen O’Neil.

Title: A Review of Gaming Technologies for Stroke Patients

Date: Wednesday 13th November 2013

Time: 2 – 3PM

Venue: P302 LTCentre For Digital Entertainment

Abstract: Stroke is a global pandemic and the largest cause of severe adult disability in the world. Incidence rates in the UK suggest that over 150,000 suffer a first time stroke, and over 80% of survivors will suffer some form of motor disability. Rehabilitation typically consists of high volumes of motor practice to engage the mechanism of neural plasticity, a form of cortical rewiring that allows the brain to adapt after damage. Meeting the rehabilitation needs for this population through one-to-one physiotherapy care is currently not possible.  There is a growing impetus on research institutions to explore cost-effective methods for increasing access to rehabilitation that may promote improved functional recovery for patients at home and in the clinic. Recent approaches include the use of video game technology as a method of increasing patient engagement and upkeep to rehabilitation programs. Of particular interest is the emergence of low cost commercial off-the-shelf devices such as the Nintendo Wii and Xbox Kinect.  In this presentation we introduce the state-of-the art application of video game technology as a modality of upper limb motor practice. We translate current approaches and technology in the literature that show particular promise to meet the needs of this population.

Sustainable Design Research Centre: Research and Professional Practice Activities and Engagement

BU research

About SDRC

Studies of surface wear mechanisms and integration of sustainable development issues within advanced engineering components and systems is the underlying principle of this research centre. Issues of tribology (friction, wear and lubrication) are studied to help understand their influence on product durability and energy consumption. SDRC has significant industrial funding and partnership in research into structural integrity in terms of corrosion, corrosion condition monitoring and prediction, nano coatings, oil condition monitoring, renewable technology & rolling contact failure.

The activities of SDRC include four areas

  1. Tribology
  2. Renewable Technology & Sustainable Design
  3. Structural Integrity and
  4. Design Education.

The Centre has extensive experimental and analytical resources to assess wear mechanisms of rolling and sliding contacts, corrosion simulation, renewable technology and surface analyses. These include rotary tribometer, micro-friction machine, corrosion simulation chamber, solar-thermal heat transfer & thermal expansion bench testing, 2D and 3D surface analysis techniques.

We have formed strong partnerships with multinational companies such as SK&F (Netherlands), Oakland Ridge National Laboratories (USA), Royal National Lifeboat Institution (RNLI), Future Energy Source Ltd, Defence Science & Technology Laboratory (DSTL) Ministry of Defence, Schaeffler, Energetix, Smith & Nephew plc, The Tank Museum, Poole Tidal Energy Partnership, Balmain Trust and have secured funding from The Royal Academy of Engineering and EPSRC.

Collaborative work is also being carried out with other universities such as Oviedo University in Spain, County Carlow Institute of Technology in Ireland, University of Wisconsin Milwaukee USA, PES Institute of Technology Bangalore India and National Institute of Technology Srinagar India.

Research Themes within SDRC

Tribology

Design for Whole Life Cycle managed Programme titled “Sustainable Development of Mechanical Systems using replacement environmental acceptable refrigerants” (£110K EPSRC plus £8K in kind from BP Castrol Technology Centre) was completed in this area of research. This research theme was further developed by another EPSRC funded studentship (£45K) with BP Castrol and Plint and Partners as industrial collaborators.

EPSRC previously funded two industrial CASE projects, “Sustainable design of lifeboat launching systems”, (£65K) and “Tribology Tests Using Oil Condition Monitoring Techniques” (£130+704K + 4K) with the Royal National Lifeboat Institution. This research is looking to identify a non-invasive condition monitoring approach that is suitable for the RNLI mode of operations and maintenance environment.

A BU funded research looking into Sustainable Design of Domestic Micro Combined Heat and Power (CHP) systems was recently completed. Micro CHP systems are very efficient and effective in generating electricity and in producing heat and hot water simultaneously.

SK&F Engineering and Research Centre (The Netherlands) have fully funded 3 PhD studentships (£38K, £54K and £57K), one fellowship (£70K) and a number of short-term projects (£16K).

Schaeffler is match funding a PhD studentship (£24K plus £41K in kind) looking into Electroplated composite coatings with incorporated nano particles for tribological systems with a focus on water lubrication. Schaeffler develops and manufactures precision products for machines, equipment, vehicles and aerospace applications. Schaeffler is a leading manufacturer of bearings worldwide and a renowned supplier to the automotive industry.

Renewable Technology & Sustainable Design

It is envisaged that further expansion of this research area, in conjunction with a large commercial partner could potentially produce a substantive portfolio of academic activity.

Renewable Technology has been identified as a BU cross-school and cross-disciplinary area within the BU’s Technology & Design Theme. The research engagement and funded projects have significantly increased in a short period of time. SDRC has been actively engaged with Poole Tidal Energy Partnership. Students led projects in mechanical current turbine and heat pumps have been completed in partnerships with the local community interest groups and stakeholders in renewable technology.

This theme has led to strong collaborative links with industry interested in renewable technology. Future Energy Source is fully funding (£49K plus in kind support £50K/year lab staff over four years, £10K/year estates costs over four years & £20K lab equipments in solar-thermal simulation and thermodynamics expansion lab) PhD research in “Research and development in novel alternative renewable energy technology” and a second project (£48K) in “Experimental investigation and mathematical modelling of dynamic equilibrium of novel thermo fluids for renewable technology applications”. In addition another short term research project looking into quantitative assessment of existing bench testing in Renewable Technologies (£3600) is funded by Future Energy Source Ltd.

Significant partnerships have been established with cross-channel academic and industrial partners within renewable technology in mechanical current turbines (tidal and fluvial) to work towards the EU strategy of renewable technology. AmpereWave has shown interest in research collaborations with SDRC. Balmain Charitable Trust is match funding (£30K) PhD in “An optimised tidal energy design for Poole harbour”.

SDRC is actively working with industry and continues to support renewable technology and sustainable design projects in the form of enterprise, short courses and consultancy.

The Centre has completed a Knowledge Transfer Partnership (KTP) projects with Electronic Technician Limited. The partnerships were to improve the competitiveness and productivity of the companies through the better use of knowledge, technology and skills.

Structural Integrity

The Tank Museum at Bovington is one of the world’s largest museums which has over 300 historic military vehicles. These vehicles are subject to structural deterioration through corrosion, corrosion fatigue, stress corrosion cracking and mechanical failures. The Tank Museum at Bovington match funded (£25K + £3600) a PhD research programme in “Sustainable Methodology of Conserving Historic Vehicles”. This project provided an understanding of military vehicle preservation from a predominantly technical viewpoint with aspects of project management and ethics of museum artefacts. The interesting aspects of this project with the Tank Museum are the requirements to run and operate large and heavy vehicles after periods of non-use in various humidity and temperature environments.

The current research in collaboration with the Tank Museum has made significant contributions to knowledge creation and exchange through coupling research in UG and PGT live projects with The Tank Museum. The outcomes to date have been disseminated through prestigious international journals (Insight: Non-Destructive Testing and Condition Monitoring, Journal of Materials Performance and Characterisation, Engineering (ASTM) & Tribology Transactions), commercial articles and international conferences as invited keynote speaking at Cranfield University, Oxford University, Cardiff University, The Institute of Physics and Time Higher Education.

The findings have also attracted international industrial players in corrosion, structural deterioration and materials’ characterisation, who have been involved through in-kind support such as NASA Materials Testing and Corrosion Control Branch (joint research publication). BAE Systems, Technology Design Limited, PANalytical Ltd, Analatom, PMI Analytical, Carl-Zeiss Cambridge and West-Dean Chichester (in kind £21K in total) in experimental resources.

Defence Science and Testing Laboratories (DSTL), Ministry of Defence is match funding (£22.5K) PhD studentship in “In-situ corrosion health monitoring and prediction in military vehicles.

Design Education

Teaching development based on research was the basis of the successful grant from the Royal Academy of Engineering grant in Sustainable development to second a visiting professor (£98K over five years). This activity has resulted in learning and teaching resource used for teaching all levels of design group programmes and by other UK and European universities.

The historical research area of the SDRC, as evidenced by the themes above, has revolved around the highly technical aspects of sustainable design, namely the techno-centric dimension. However, more recently, the research of the SDRC has expanded to encompass the socio-cultural aspects of sustainable design. Initially, this developed from the area of sustainable design education with the awarding of an HEA grant to build a web-based learning resource for the socio-centric dimension, however, this has now expanded through consultancy work currently being undertaken, and through current bidding for funding, for example, to investigate how product life spans may be extended by re-designing products with a focus on product attachment.

SDRC has established long standing collaborations with University of Wisconsin Milwaukee USA, PES Institute of Technology Bangalore India, National Institute of Technology Srinagar India and Oviedo University Spain.

SDRC has visiting professors from PES Institute of Technology Bangalore India, National Institute of Technology Srinagar India and visiting research fellows from Oviedo University Spain

Current PGRs & Research Projects

Surname First Name Project Title
ALKHATEEB Maryam Element, Use and Meaning: Between the Vernacular and Current Interiors in Saudi Arabia, Eastern Region.
ANAND Mayank A Condition Based Approach to the Tribology of RNLI Marine Systems
AWAN Abdul Waheed Defect Tolerance Assessment of Silicon Nitride in Rolling Contact
MAHER Carmel Practice Based Design Research: Development of research models, methodologies and evaluation criteria appropriate to its intellectual culture.
MORGAN Alan Optimisation of Braking Systems and Sustainable Design in Traction Drive Passenger and Goods Lifts
NASSEF Iman A Market Driven Standard for a High Quality Graduate
SAEED Adil Sustainable Methodology of Conserving Historic Vehicles
WEN Zheming (Bruce) Research and development in novel alternative renewable energy technology
NAZIR Mian Hammad In-situ corrosion health monitoring and prediction in military vehicles
BAJWA Rizwan Electroplated composite coatings with incorporated nano particles for tribological systems with the focus on water lubrication
HÜSEYN UTKU Helvaci Experimental investigation and mathematical modelling of dynamic equilibrium of novel thermo fluids for renewable technology applications

Public Engagement

http://blogs.bournemouth.ac.uk/research/2013/05/23/renewable-energy-and-renewable-technology-public-engagement-event/

SDRC Membership

  1. Ben Thomas
  2. Christine Keenan
  3. Clive Hunt
  4. Franziska Conrad
  5. Gary Underwood
  6. Kamran Tabeshfar
  7. Mark Hadfield
  8. Nigel Garland
  9. Sarah Palmer
  10. Tania Humphries
  11. Tilak Ginige
  12. Zulfiqar Khan

 

Contact Us

For research, enterprise or professional practice inquiries within SDRC themes please contact

Dr Zulfiqar Khan (Associate Professor)

Director SDRC

zkhan@bournemouth.ac.uk

CIM Dorset Event – Brand Purpose – Richard Calvert from Bright Blue Day

Training

Join us on Tuesday 12 November 2013 for the latest in our series of events held by the CIM Dorset branch.

Richard Calvert from Bright Blue Day is joining us to tell us about Brand Purpose.  As marketers we’re finding new ways to integrate Social, Local and Mobile communications into our customers day-to-day lives – invariably introducing complexity and unnecessary hassle into our lives.

There has been an explosion in the tools, techniques, strategies and tactics available to the SO LO MO marketer – each promising to deliver just the right message at the right time in the right place to the right person.  How do we apply SO LO MO thinking to deliver real value to customers, prospects and to our businesses?

How do we deliver real brand purpose and cut through everything that we can do in order to deliver just what we should?

Arrival from 6pm for a 6:30pm start.  Networking from 6pm until the event start. To book please visit http://bit.ly/1idcvi5

CEMP Bulletin

Awarded & submitted bids, BU research, Funding opportunities, PG research, Uncategorized

 

Here is the latest CEMP Research & Innovation bulletin. CEMP bulletin 10.10.13

New for this year:


(1) A more targeted approach to identifying funding opportunities;

(2) Funding calls aligned to research themes;

(3) If you would like to come and chat about anything in this bulletin, your own research or other projects / ideas that CEMP can help with, our monthly ‘CEMP Coffee Morning’ is at 9.30-10.30 on Thursday October 17th in the new CEMP office (CAG02).

 

SDRC PGRs’ Social Media Engagement

PG research

PGRs within BU Sustainable Design Research Centre have recently launched facebook page, for showcasing their research and professional practice engagement and activities.

The activities of SDRC include four areas 1; “Tribology”, 2; Renewable Technology & Sustainable Design 3; Structural Integrity and 4; Design Education. The Centre has extensive experimental and analytical resources to assess wear mechanisms of rolling and sliding contacts, corrosion simulation, renewable technology and surface analyses. These include rotary tribometer, micro-friction machine, corrosion simulation chamber, solar-thermal heat transfer & thermal expansion bench testing, 2D and 3D surface analysis techniques.

SDRC has formed strong partnerships with national and multinational companies such as SK&F (Netherlands), Royal National Lifeboat Institution (RNLI), Future Energy Source Ltd, Defence Science & Technology Laboratory (DSTL) Ministry of Defence, Schaeffler, Energetix, The Tank Museum, Poole Tidal Energy Partnership, Balmain Trust and has secured funding for conducting collaborative research.

Collaborative work is also being carried out with other universities such as Oviedo University in Spain, County Carlow Institute of Technology in Ireland, University of Wisconsin Milwaukee USA, PES Institute of Technology Bangalore India and National Institute of Technology Srinagar India.

Current SDRC Research Projects

A Condition Based Approach to the Tribology of RNLI Marine Systems

A Market Driven Standard for a High Quality Graduate

Defect Tolerance Assessment of Silicon Nitride in Rolling Contact

Electroplated composite coatings with incorporated nano particles for tribological systems with the focus on water lubrication

Element, Use and Meaning: Between the Vernacular and Current Interiors in Saudi Arabia, Eastern Region.

Experimental investigation and mathematical modelling of dynamic equilibrium of novel thermo fluids for renewable technology applications

In-situ corrosion health monitoring and prediction in military vehicles

Optimisation of Braking Systems and Sustainable Design in Traction Drive Passenger and Goods Lifts

Practice Based Design Research: Development of research models, methodologies and evaluation criteria appropriate to its intellectual culture.

Research and development in novel alternative renewable energy technology

Sustainable Methodology of Conserving Historic Vehicles

Tribological Properties and Performance of Bio-fuels on Internal Combustion Engines: an application to the Life Cycle Analysis of Refined Palm Oil (RPO) Bio-diesel

 

For research, enterprise or professional practice inquiries within SDRC themes please contact

Dr Zulfiqar Khan (Associate Professor)

Director SDRC

zkhan@bournemouth.ac.uk

 

CEMP Research & Innovation

BU research, Funding opportunities, Publishing, Uncategorized

      At the open forum last week, we agreed the following actions for the coming year:

Research & Innovation Bulletin – to continue for information only, once a fortnight, via the research blog, from October 10th;
CEMP meetings – for CEMP staff only, once a month, to include bidding and income monitoring;
CEMP Coffee Mornings – once a month, ‘drop in’ for anyone in the MS who wants to talk to us about funding applications or other research / innovation opportunities. The first of these will be Thursday October 17th;
CEMP workshops – a series of supportive events to help people get started with research, bid writing, publishing, networking;
CEMP Associates – a proposal will be submitted to facilitate more experienced colleagues working with CEMP in a more structured fashion – to collaborate on bid writing, projects and making connections across academic groups.

Reminder – CEMP open meeting this Thursday

BU research, Uncategorized

    Reminder about this Thursday’s meeting which is an open invitation for people to come along, have a coffee and tell us how we can support collaborative approaches to pedagogic research & innovation.

The background:

This academic year CEMP will continue to publish a fortnightly research & innovation funding bulletin via this blog, like so:  CEMP bulletin 26.9.13

The Research & Innovation meetings will also continue, but we want to invite colleagues from the rest of the Media School and across BU to tell us how we can increase engagement and collaboration in all aspects of pedagogic / educational research and innovation related to media / technology.

Previously, the model has been like this –

The bulletin is posted on a Thursday – this contains information about funding calls and also monitors live projects and reports on the outcomes of all bids.

The next Thursday, we meet to discuss the calls in the bulletin and report on bids in progress.

The next Thursday, the updated bulletin is posted

….and so on.

So far, we’ve been successful in one of our two key objectives – increasing CEMP bidding activity, but less successful in the other – developing collaboration with other people in BU, either in response to the funding calls in the bulletin or to try to match peoples’ ideas for projects / innovation to funding opportunities. This second objective is a service / function CEMP can offer to the University, and we’d like more colleagues to access this.

So – we’d like to review how we do this, in order to get better at the second objective, and to this end the first R&I meeting of this year is an open forum and everyone is invited to either come along and contribute to the discussion or to add a comment to this post if you have ideas but can’t make the meeting.

Meeting details:

Thursday 26th September 10-12

CEMP’s new office (CAGO2) – with tea, coffee and pastries!!!

Key issues for discussion:

  • How can CEMP support people in developing research / innovation projects?
  • What are the structural obstacles and how can we overcome them?

When we’ve got everyone’s ideas / requests for how to proceed, we’ll decide how to go ahead.

I hope we’ll see you there or read your ideas on the blog.

Julian

Fusion Funding: Linking level I & H through Design and Engineering Research

BU research, Fusion

Background:

Through the BSc Design Engineering Level I Design Projects (DP) unit we aim to enhance student understanding of key theory through practical implementation. For their Level H Advanced Technology and Innovation (ATI) unit the students are expected to examine a technical area of engineering, develop their understanding and produce a research paper. This Fusion co-creation project aims to link these activities by implementing Level I DP solutions to solve Level H ATI research problems.

Context:

Level I BSc Design Engineering students were each asked to design a Fatigue Testing machine and, in order to this, they had to develop basic understanding of fatigue and fracture mechanics. These student solutions represent a wide range of designs but can essentially be condensed to two underlying technologies: Pneumatic actuation & Electric motor drive.


By providing the basic building blocks and adaptable elements students can create simple fatigue testing machines to support their ATI research through experience of research lab work yielding research output and practical understanding.

Progress:

The basic design of outline systems and a reference platform have been finalised and part orders generated. This represents specifying 135 component items including structural framework, mechanical drive systems, pneumatics, programmable logic controller (PLC), data acquisition (DAQ), load cell and amplifier, motor controller and motor gearbox unit etc. Hopefully these elements will begin arriving shortly and custom components can be produced in Tolpuddle House before the end of September.

Next step:

The next stage is to build up reference platforms in both Pneumatic and Mechanical configurations. Oh, and learn how to programme a PLC, DAQ software and a SCADA package, doh!

About us:

Dr Nigel Garland is the senior lecturer is Sustainable Design within the School of Design Engineering and Computing.

Dr Zulfiqar Khan is the Director of the Sustainable Design Research Centre.

CEMP Research and Innovation meetings: an invitation

BU research, Funding opportunities

     This academic year CEMP will continue to publish a fortnightly research & innovation funding bulletin via this blog.

The Research & Innovation meetings will also continue, but we want to invite colleagues from the rest of the Media School and across BU to tell us how we can increase engagement and collaboration in all aspects of pedagogic / educational research and innovation related to media / technology.

Previously, the model has been like this –

The bulletin is posted on a Thursday – this contains information about funding calls and also monitors live projects and reports on the outcomes of all bids.

The next Thursday, we meet to discuss the calls in the bulletin and report on bids in progress.

The next Thursday, the updated bulletin is posted

….and so on.

So far, we’ve been successful in one of our two key objectives – increasing CEMP bidding activity, but less successful in the other – developing collaboration with other people in BU, either in response to the funding calls in the bulletin or to try to match peoples’ ideas for projects / innovation to funding opportunities. This second objective is a service / function CEMP can offer to the University, and we’d like more colleagues to access this.

So – we’d like to review how we do this, in order to get better at the second objective, and to this end the first R&I meeting of this year is an open forum and everyone is invited to either come along and contribute to the discussion or to add a comment to this post if you have ideas but can’t make the meeting.

 

Meeting details:

Thursday 26th September 10-12

CEMP’s new office (CAGO2)

Tea, coffee and pastries to be served!

Key issues for discussion:

  • How can CEMP support people in developing research / innovation projects?
  • What are the structural obstacles and how can we overcome them?

When we’ve got everyone’s ideas / requests for how to proceed, we’ll decide how to go ahead.

I hope we’ll see you there or read your ideas on the blog.

Julian

 

Find out more about the Technology and Design research theme

Research themes, Uncategorized

Renewable Technology cross-School events were held during last academic year (January 2013 and Feb 2013), these were well attended. Presentations were led by academics and Local Government Representatives including from Poole Borough Council. Additional meetings took place in the area of medical engineering in collaboration with local Health Trusts with excellent attendance cross school and the medical professions. Internal cross school meetings were also organised in the area of creative design and design business. During BU’s Festival of Learning a number of public engagement events were held in June 2013. These events provided a networking opportunity for public engagement, local/regional businesses, government, community and local council representatives, academics and researchers. This included a “question time” activity, one day course in sustainable design and “let’s take pride in design and engineering”  In addition the theme exhibited with cross-school academics at the GovToday Carbon Reduction 2012 event in November 2012 at London and delivered a master class. Attendees included representatives from relevant government departments, agencies and other public sector organisations.

Future plans include international networking and extending our public engagement activities at the next BU Festival in 2014. In addition we will develop initiatives around the computing/engineering interface. This will include autonomous systems, robotics and intelligent manufacturing. 

 

Sign up to the Technology and Design BU Research Themes here:

    Your Name (required)

    Your Email (required)

    Your School / Professional Service (required)

    Staff or PGR student? (required)

    StaffPGR

    Please select the themes that you are interested in (required)

    eBU is now live with papers for comment!

    BU research, PG research, Publishing, Research news, Research themes, Uncategorized

     

    eBU can now be accessed

    I am delighted to announce that eBU, the online BU journal that operates on the basis of immediate publication and open peer review, is now live with two papers ready for comment.

    Jane Murphy (HSC), Louise Worswick (HSC), Andy Pullman, Grainne Ford (Royal Bournemouth Hospital) and Jaana Jeffery (HSC PhD student) suggest that e-learning is a great way to deliver nutririon education and training for health care staff who are involved in the care pathway for cancer survivors. The abstract can be found below:

    Health care professionals are in a prime position to provide diet and lifestyle advice, but there are gaps in their own knowledge and education highlighting the need for improvements in teaching and learning approaches. This paper presents the rationale for the design, implementation and evaluation of an e-learning resource to deliver nutrition education and training for health care staff who are involved in the care pathway for cancer survivors. The findings of the evaluation are discussed and the importance of the resource in terms of its impact upon the provision of nutrition, diet and lifestyle advice in practice for the delivery of care and support of cancer survivors.

    This paper can be accessed here –

    http://ebu.bournemouth.ac.uk/index.php/ebu/article/view/9

    Dorothy Fox (ST) uses original research to discuss the dynamics of doctoral supervision and provides recommendations for improving supervisory practice. The abstract can be found below:

    Abstract:

    This article reports an exploratory study of the professional relationships between supervisors who co-supervise management doctoral students in England. It draws on the concept and theoretical framework of emotional geographies (Hargreaves 2001) to understand the affective elements of these relationships. Team supervision has become mandatory in many Western universities and whilst the advantages and disadvantages of this development have been identified, the relationship between supervisors has not received the same attention. This is despite the evidence from students that positive or negative relationships within the supervisory team are of critical relevance to a successful outcome. Data from 13 in-depth interviews with supervisors was analysed and the emotional geographies are revealed. Further analysis showed that differences within the relationship are resolved in ways that are either ‘autocratic’, ‘overtly democratic’ or ‘covertly democratic’. With the aim of improving the quality of supervisory practice, the implications for doctoral supervision are discussed.

    This paper can be accessed here –

    http://ebu.bournemouth.ac.uk/index.php/ebu/article/view/8

    CEMP Research and Innovation Bulletin

    BU research, Funding opportunities, PG research, REF Subjects, Research news, Research themes

    The updated CEMP bulletin is here.

    CEMP Cluster bulletin and agenda 25.7.13

    Whilst there is no cluster meeting to review this, due to annual leave colleagues are encouraged to have a look since there are a number of good ‘leads’ here and several imminent deadlines for calls people have identified for applications.

    Next academic year, we’d like to encourage colleagues to approach CEMP to provide support for developing research ideas into projects or matching proposals to funding, as well as responding to the bulletin items.